Concrete Products
Pre-blend of Portland Cement, Sand, and Gravel. Just add water. Used for general concrete work. Yields approx .60 cu ft/80 lb.
| Saylors Grey Portland Cement |
|
Consistent plastic and hardened mortar properties. Mixes well with hydrated lime. 90 lb.
| Saylors White Portland Cement |
|
Consistent plastic and hardened mortar properties. Mixes well with hydrated lime. 90lb.
| C-Cure Thin-set Full-Contact 907 |
|
Pre-blended polymer-modified dry-set mortar. Specially formulated to fully support heavy tiles and natural stone, gauged or ungauged. Can be built up to ¾” without shrinkage. Can hold large stone in place in demanding vertical applications. Interior or exterior. 50 lb.
| Spec-Mix Masonry Mortar Mix Type N |
|
Pre-blend of Portland Cement, Hydrated Lime and dried Masonry Sand. Type N is a medium compressive-strength (750 psi) mortar made of 1 part portland cement, 1 part hydrated lime and 6 parts sand. Type N is recommended for most exterior, above-grade walls exposed to severe weather, including chimneys, outdoor fireplaces, and walls. 80 lb.
| Spec-Mix Masonry Mortar Mix Type S |
|
Pre-blend of Portland Cement, Hydrated Lime and dried Masonry Sand. Type S is sometimes specified for masonry at or below grade, but offers another quality. S has high compressive strength (1800 psi) but adds high tensile bond strength. S contains 2 parts portland cement, 1 part hydrated lime and 9 parts sand, and yields maximum flexural strength to fight wind, soil pressure or earthquakes. 80 lb.
| Brixment Mortar Mix Type N |
|
Pre-blend of Portland Cement and Hydrated Lime. Should be mixed with 2 ¼ to 3 cubic feet of masonry sand Right Bond Bonding Admixture 1 gal/ 5gal – significantly improves adhesion, tensile, compressive and flexural strengths of cement based materials. Improves freeze-thaw stability of cement based products. May be used above or below grade, interior or exterior. 70 lb.
| Spec Mix Polymer Modified Stone Veneer Mortar (PMSVM) |
|
Pre-blend of dry cementitious materials, masonry sand and performance polymers specifically designed to provide superior bond for natural veneer and bricks. PMSVM is a technically advanced mortar deigned to provide excellent workability, cohesion, high bond strength , water resistance, efflorescence minimization and durability. PMSVM is an ideal solution for architects and contractors where high bond strength and sag resistance mortar is needed during installation. 80 lb.
|
